Getting Started with Your Flexus Q
- Turn On/Off: Press the fire button five times quickly to turn the device on or off.
- Fill the Pod:
- Remove the pod from the device.
- Insert a coil into the pod.
- Unplug the rubber bung and fill the pod with e-liquid. Avoid overfilling to prevent leaks.
- Re-plug the bung and let the coil soak for 5-10 minutes before using. This allows the coil to fully absorb the e-liquid, preventing dry hits and enhancing flavour.
- Set Power Level: Click the fire button three times to select your desired power level (red for low, blue for medium, green for high). The higher the power level, the more vapour and flavour you’ll experience, but it can also lead to faster coil burnout.
- Adjust Airflow: Slide the button on the side of the device to adjust airflow to your preference. A tighter airflow is ideal for mouth-to-lung (MTL) vaping, while a more open airflow is better for direct-to-lung (DTL) vaping.
Troubleshooting Common Issues:
- Leaking Pod: This can be caused by a worn-out coil, overfilling, or a loose seal. Replace the coil, avoid overfilling, and check the rubber bung for proper placement.
- Slurpy Vaping: This may occur if the coil has absorbed too much liquid. Try flicking the device upside down while pressing the fire button to expel excess liquid.
- Hot Device: Ensure you’re using the included USB wall plug. Avoid using fast-charging plugs, as they can overheat the device.
- Button Flashing: Check the contacts between the battery and pod/coil for cleanliness. If necessary, recharge the device or replace the coil.
- Coil Burnout: Use the correct power setting, avoid dry burns (vaping without enough e-liquid), and replace coils regularly (every 5-7 days).
- Loose Pod Connection: Over time, the pod may become loose. If this happens, try tightening it slightly or consider replacing the pod.
Additional Tips:
- Cleaning: Clean the top of the battery and bottom of the pod when changing coils to prevent buildup and ensure optimal performance.
- Battery Life: Check the LED indicator light to monitor battery level. If the light is red, recharge the device.
- E-Liquid Strength: Choose the right nicotine strength based on your smoking habits. If you’re new to vaping, start with a lower nicotine strength and gradually increase it as needed.
- Storage: When storing your Flexus Q, turn it off and remove the pod to prevent accidental activation.
Remember: Always read the user manual for specific instructions and safety guidelines. If you have any further questions, don’t hesitate to contact us.
Add comment